Dirt Bikes

INTERCEPTOR™ (AIT)
A high-performance two-cycle oil with a performance emphasis on exhaust power valves. Excellent for all types of dirt bikes. Contains high levels of detergent additives to prevent exhaust valve and piston ring sticking. High quality replacement for manufacturer branded oils. Injector use or 50:1 pre-mix.

DOMINATOR™ (TDR)
Premier racing two-cycle oil with a performance emphasis toward high horsepower and modified racing or trail motors. Contains higher viscosity oils for maximum protection under high loads and heat. Injector use or 50:1 pre-mix.

HP Injector™ (HPI)
Very good for non-power valve motorcycle engines. Injector use or 50:1 pre-mix.

10W-40 Advanced Synthetic Motorcycle Oil (MCF)
For those who demand the best. Advanced multi-functional formula. Fulfills the requirements of both domestic and foreign high performance motorcycles. Recommended for both liquid or air-cooled 4-stroke engines as well as all 2&4-stroke motorcycle transmissions requiring a 10W-40, GL-1lubricant. Wet clutch compatible meeting the latest JASO MA2 frictional requirements. Outstanding gear protection. Anti-rust fortified providing exceptional off-season protection. Recommended for Honda, Kawasaki, Yamaha, Suzuki, BMW, and Husqvarna motorcycles.

20W-50 Advanced Synthetic Motorcycle Oil (MCV)
High performance motorcycle for applications calling for an SAE 20W-50 lubricant. Multi-functional, and fulfills the requirements of both domestic and foreign motorcycles. Excellent performance in both air and water-cooled motorcycle engines due to high heat resistance, robust anti-wear additive package and oxidation resistance. Absolutely shear stable and will not thin out from mechanical activity making it an excellent transmission and primary oil. Contains special anti-rust agents for superior rust protection, and no friction modifiers for excellent wet clutch performance. Recommended for use in Aprilia, BMW, Honda, Kawasaki, KTM, Ducati, Suzuki and Yamaha motorcycles.

Formula 4-Stroke® PowerSports 0W-40 (AFF)
The prefect all-season high performance motorcycle engine oil. Reduces wear. Wet clutch compatible containing no friction modifiers. Broad viscosity range makes it excellent for use in both hot and cold weather conditions.

Formula 4-Stroke® 10W-30/SAE 30 Small Engine Oil (ASE)
Designed original for the adverse operating conditions of air-cooled commercial engines, this is one tough oil. Excellent shear stability, exceptional wear protection, oxidation resistant, and wet-clutch compatible makes this oil an ideal choice for both air and water-cooled motorcycles requiring an SAE 10W-30 or 30 grade oil.

AMSOIL EaOM Motorcycle Oil Filters (EaOM)
AMSOIL Ea Motorcycle Oil Filters are made with premium-grade full synthetic media. Ea Motorcycle Oil Filters feature advanced full synthetic nanofiber technology, making them the highest efficiency filters available for the motorcycle market.

Twin Air Filters PowerSports Filters
Twin Air air filtration products provide dirt bikes with maximum intake protection in any riding conditions. The coarse open-pore foam catches airborne dirt, grime and sand, while the fine open-pore inner foam acts as a second filter to trap the smallest particles while ensuring maximum air passage. They are constructed with an exclusively formulated adhesive that withstands repeated cleanings, even with harsh solvents or gasoline. AMSOIL also offers several Twin Air filter cleaning and oiling products, including biodegradable products that are popular in this market.

SEVERE GEAR 75W-90 (SVG)
Specifically engineered for high demand applications. Superior lube “film strength” combined with extra additives protects gears and bearings from scoring and wear. Resists high heat and possess excellent cold flow properties. Excellent for shaft drive motorcycles calling for a GL-4 or GL-5 oil. Outperforms all conventional gear oils.

SEVERE GEAR 75W-140 (SVO)
Specifically engineered for high demand applications calling for a heavier 140 grade oil. Superior lube “film strength” combined with extra additives protects gears and bearings from scoring and wear. Resists high heat and possess excellent cold flow properties. Excellent for shaft drive motorcycles calling for a GL-4 or GL-5 oil. Outperforms all conventional gear oils.

Synthetic 80W-90 Gear Lube (AGL)
High quality replacement for applications specifying SAE 80W-90 conventional gear lube. Synthetic construction provides improved cold flow properties, high viscosity index and heat resistance. Contains an over treat of high quality additives, exceeding the minimum standards. Provides excellent wear protection and long equipment life.

Series 2000 Synthetic Racing Grease (GRG)
Ultimate protection for hard-driven, high-performance motorcycles. Dramatically reduces friction and wear for improved performance. Excels at both high and low temperature performance. Outperforms other conventional and synthetic greases.

Synthetic Multi-Purpose Grease (GLC)
Reduces friction and wear in high-speed, high-temperature components such as motorcycle wheel bearings. Keeps components running clean and trouble free for outstanding performance and long life. NLGI #2 is the primary wheel bearing recommendation. NLGI#1 Multi-Purpose Grease is also available in a convenient spray formulation, which is ideal for greasing hard-to-reach equipment such as suspension pivot point, springs and other common applications.

MP Heavy-Duty Metal Protector (AMH)
A heavy-duty spray lubricant fortified with special rust and corrosion inhibitors. Penetrates and adheres to metal surfaces, leaving a long-lasting protective coating. Apply MPHD to any metal surface that requires a heavy-duty lubricant or is exposed to the damaging effects of salt, moisture or chemical corrosion. Works as an undercoat, leaving a wax-like film. Recommended for motorcycle chains. Won’t “sling-off”. Dry to the touch. Does not attract dust.

MP Metal Protector (AMP)
Displaces water and protects metal surfaces from rust and corrosion. Provides a light film that prevents metal-to-metal contact. Excellent for use on guns, hinges, squeaky mechanical objects, electrical systems and more. Penetrates existing rust buildup. Also dries wet electrical systems.

Silicone Spray (ALS)
Perfect for lubricating nonmetal surfaces that contact with metal, nylon, cardboard, fiberglass, wood or plastic surfaces. Special non-staining formula.

Shock Therapy Suspension Fluid #5 Light (STL)
Controls friction, heat, wear, foaming and scuffing in suspension components. High viscosity index and shear stability performance controls shock fade and inconsistent dampening in temperature extremes.

Shock Therapy Suspension Fluid #10 Medium (STM)
Controls friction, heat, wear, foaming and scuffing in suspension components. High viscosity index and shear stability performance controls shock fade and inconsistent dampening in temperature extremes.

Propylene Glycol Antifreeze and Engine Coolant (ANT)
Compatible with all the major brands of anti-freeze. Essentially nontoxic and biodegradable. Provides superior performance in all climates. Contains special corrosion inhibitors and antifoam agents.

Series 2000 Octane Boost (AOB)
Maximizes power and improves performance in all two-cycle and four-cycle gasoline engines. Increases octane number up to seven points. Reduces engine knock, improves ignition and engine response, helps fuel burn cleaner and inhibits corrosion. Recommended for off-road and racing use.

Gasoline Stabilizer (AST)
Reduces the oxidation process that occurs when fuel is stored for extended periods to prevent the formation of varnish and sludge which can clog carburetors, injectors, stick floats and cause poor engine performance.

Fogging Oil (FOG)
A highly effective rust preventative designed to protect internal engine components during storage or long periods of inactivity. Ideal for motorcycles with either a two or four-stroke engines.

Mothers® Polishes, Waxes and Cleaners
Airborne contaminants, corrosive pollutants and harsh environmental conditions can all contribute to the premature aging of a car's paint. Regular washing and waxing can easily make the difference between a long lasting, luminous glow, or a dull, dumpy finish. Proper vehicle maintenance involves cleaning paint and keeping it clean, which is a much smarter choice, in the long run, than trying to repair distressed, damaged paint. Mothers® offers a unique and wide product line that includes everything needed to clean, polish and care for your motorcycle.

AMSOIL Miracle Waterless Wash and Polish Spray (AMW)
This unique dry car wash and polish delivers outstanding performance and quick, easy and economical spray application. No water required. It’s simply the fastest way to clean your motorcycle.